Case Studies
Résidence Colbert
Colombes, France
Code: OP08
Resumen
1970 built residential uilding in the dense centre of Colombes, a western suburb of Paris.
Original situation
The retrofitting process started in 2013, and the project consists of three buildings using the same construction methods (A: 2529 m², B: 1523 m², C: 1768 m²). All three buildings were retroffitted together. The buildings were using approximately 250 kWh/m² of oil heating.
Renovation approach
The main retrofit steps were finished in 2020 after a 2-year delay. Some finishing touches are still being undertaken in 2022, but now in 2023 the project is completely finished and the residents are in.
Modernisation proposal
Global prefabricated retrofit set to reach the EnerPHit standard. The facade uses the "Panobloc" pre-fab facade system.
Efficiency improvement
After the renovation measures, this social housing made of 3 buildings in total, saved approx. 700 tonnes CO² annually and used wood pellet heating.
PHPP verification sheet after retrofit
| TFA | existing treated floor area (usable floor space) |
5820.0 m2 |
|---|---|---|
| Space heating | Heating demand |
20.0 kWh/(m2a) |
| Heating load |
12.0 W/m2 |
|
| Space cooling | Cooling & dehum. demand |
0.0 kWh/(m2a) |
| Cooling load |
0.0 W/m2 |
|
| Frequency of overheating (> 25 °C) |
8.0 % |
|
| Frequency of excessively high humidity (> 12 g/kg) |
0.0 % |
|
| Airtightness | Pressurization test result n50 |
0.6 /h |
| Non-renewable Primary Energy (PE) | PE demand |
117.0 kWh/(m2a) |
| Primary Energy Renewable (PER) | PER demand |
152.0 kWh/(m2a) |
| Generation of renewable energy (in relation to projected building footprint area) |
– kWh/(m2a) |
|
| EnerPHit classic |
no |
Key facts
Building typology
Urban settlement | housing colony
Existing treated floor area (usable floor space)
5 820 m2
Building owner
Logirep/Polylogis
Consulting outphit partner
ProPassif
Project status
Finished
Contact
Etienne Vekemans
CEO
PROPASSIF
Phone: 0145081335
E-Mail: e.vekemans@propassif.fr